Insulating sloping ladder from fiberglass plastic LPTS-7R

Insulating sloping ladder from fiberglass plastic LPTS-7R is intended for conducting work by personal at the air power line’s supports 0,4-10 kV and for another works in the electrical installations. The ladder was designed as universal variant alternative to variant with using claws and climbs for high voltage power lines supports 0,4-10 kV of all…

More >>
Insulating ladders from fiberglass plastic LSPO

Insulating single throw ladders from fiberglass plastic LSPO are intended for carry out constructional, mounting, adjusting and repairing works in electric installation, industrial and administrative building and at the open air. The main parameters of the ladders:   Parameters Marking of the ladder LSPO-2 LSPO-2T LSPO-2,5T LSPO-3 LSPO-4 LSPO-5 Length, m 2,0 2,0 2,5 3,0…

More >>
Insulating stepladders placed near the walls SSP and single side ones SSO from fiberglass plastic

Stepladders are manufacturing from section electric insulating fiberglass plastic and satisfy all demands of actual normative and technical documentation. The main parameters of the stepladders: Type of stepladders Parameters Dimensions, m Number of steps Weight, kg, not more H h A B C L SSP-1.5 2,00 1,00 0,50 0,50 0,30 1,5 3 11,0 SSP –…

More >>
Insulating ladders from fiberglass plastic, transformable into self supporting step-ladders

Ladders are intended for carry out mounting, adjusting and repairing work in electric installations, industrial and administrative buildings and at the open air. The main parameters of the ladders: Parameters Type of ladders LSPTS-3 LSPTS-4 LSPTS-5 Length, m 3020 4020 5020 Width, m not more above 400 400 400 below 670 740 740 Number of…

More >>
Insulating vertical ladder from fiberglass plastic LPVST-7,5

Ladder is intended for conducting works at the air power line’s supports 0,4-10 kV. The ladder was designed as universal variant alternative to variant with using claws and climbs for high voltage power lines supports 0,4-10 kV of all types. The ladder can be used for rising on unreliable power lines supports with exceeded working…

More >>
Insulating sloping double-throw ladder from fiberglass plastic LPNS-2K7

The ladder LPNS-2K7 is intended for conducting work in technical service and running repair of contact network of direct and alternate current of electric railways and power lines. The ladder has special electrically insulating protective-decorative atmosphere-resistant coating. The main parameters of the ladder: Length in working position, mm 7200 Width upstairs, mm 320 Width below,…

More >>
Combined insulating ladder from fiberglass plastic for rising on the supports with height of 9 and 12 m LKS

The ladder is intended for conducting work at the high voltage power line’s supports at the height of 9 and 12 m. The main parameters of the ladder: Length of ladder at the mounted position, mm 9000 / 12000 Transport dimension, mm 3800х600х450 / 3800х600х550 Weight of ladder, kg 62 / 75 The ladders are…

More >>